
Add to Cart
PL320 High Stability Digital Ultrasonic Water Tank And Fuel Tank Level Sensor 4-20mA
Ultrasonic sensor | Low power-sensor | Middle power-sensor | Large power-sensor | |||
The Max. range | ≤5m | ≤7m | ≤10m | ≤10m | ≤12m | ≤15m |
Blind area | Standard: 300mm | 350mm | 500mm | 500mm | 600mm | 800mm |
OEM:200mm | ||||||
Power supply | Standard: DC24V | DC24V | DC24V | DC24V | DC24V | DC24V |
OEM:DC12V, AC220V | / | OEM:DC12V, AC220V | / | |||
Beam angle | 15° | 12° | 9° | |||
Operating frequency | 38K±10Khz | 55K±10Khz | 40K±5Khz | |||
Accuracy | Standard: ±0.5%F S or ±5mm; (at 25℃, Absolutely flat target under the condition of standard) | |||||
OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS | ||||||
Output signal | Standard: 4-20mA (3 wires) | |||||
OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM | ||||||
Measuring mode | Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface | |||||
OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error. | ||||||
Working temp | Standard: 0~50℃ | |||||
OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃ | ||||||
Wiring Mode | Quick connect type terminal(can be customized cable outlet about 1m) | |||||
Installation | Screw type or sifter clamping ; screw size: M68*2.0mm | |||||
Protection class | IP65, OEM of IP66, IP67, IP68 | |||||
Working environment | Normal pressure, non-explosion-proof; non-corrosive environment | |||||
OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance | ||||||
NOTES | 1.When level range ≥15m, equip with other type ultrasonic sensors 2.Users no need to set the address, bps, installation height, so please verify to factory before ordering 3.For RS485-PC product, users can adjust the parameter by software(the default software) The max measure range depends on the smooth level surface, so please confirm the real |
PL320 3meters ultra sonic water level sensor 4-20mA combines ultrasonic sensors, temperature sensors, ultrasonic servo circuit, transmission circuit and uses SMD components and ASIC which is developed together with the United States partner.
All these features realize a concise and smart level transmitter. All gold-plated circuit boards, internal electromagnetic shielding and software digital filter are tested for (industrial) 48 hour under high and low temperature aging. It promises higher and long-term reliability. Shell is made of solid texture and good NLEPF acoustic characteristics of synthetic material. The body is shape sophisticated aesthetics, waterproof, dustproof, and can adapt to the most of working conditions on site.A very quick and easy installation, maintenance can be realized.
Features
● Range of up to 60 meters
● Level or material measurement
● Level or material measurement
● Response speed is adjustable
● Easy Installation
Applications
● River water level measurement
● Lake water level measurement
● Shallow water level measurement
● Hydrological monitoring
● Environmental protection
Notes for selection range of ultrasonic level sensor:
For example, in a tank for measuring hydrochloric acid level, due to the strong volatility of the medium, the air in the tank may suspend a large number of fine liquid particles, which will scatter part of the sound waves of the ultrasonic level gauge. For this phenomenon, when the liquid drops to a lower level, the ultrasonic liquid level gauge may not receive echoes. Therefore, it is recommended that the user increase the measurement distance by 30-50% when selecting the range. For example, for a 6-meter-high tank, it is best to use a 10-meter Uson-11 ultrasonic liquid level gauge for measurement.
Dimension
◆20years in hydrology and meteorology wireless communication industry
◆Apply in more than 50 countries & areas
◆Support OEM/ODM cooperation
FAQ
1.Q: How long is the delivery?
-- Mostly within 10days
2.Q:Can I get a sample?
-- Sure, contact our sales please
3.Q:What is your MOQ?
-- 1pcs
4.Q: How about warranty time?
-- 12-18month
5.Q: How can I visit your factory?
-- Fly to Xian Yang air port, it’s our pleasure to pick you up.
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.
Ordering guide:
In order to recommend the suitable sensor, please kindly advise us the following information
1..What is your testing medium ? oil, water, gas, waster water, or others.
2.Working temperature of the sensor ? -40°C~100°C or others
3.Pressure range ? -1-0bar,0-1bar,0-16bar,0-40bar,0-100bar,0-600bar or others
4.Output signal? 4-20mA, 0-5V ,0.5-4.5V,0-10V,RS485 or other
5.Electronic connection ? DIN43650 ,Packard, Aerial plug, direct cable or others.
6.Screw ? M20×1.5,G1/4,G1/2,R1/2,NPT1/2