Atech sensor Co.,Ltd
Atech sensor Co.,Ltd
Add to Cart
Atech FL301 Rs485 Modbus Digital Water Flow Meter
The electromagnetic flowmeter adopts the volume flow measurement method, that is, the measurement is not sensitive to changes in fluid density, temperature, pressure, viscosity, etc. Once calibrated with water, the Sea Salt Irrigation Sewage Molasses Electromagnetic Flowmeter can be used to measure other types of conductive fluids - no additional calibration is required. This is a significant advantage not available in other types of flow meters.
Speifications
Main features
1. No moving assembly, no abrasion
2. Turn down ratio: 1:100
3. No flow lifting device
4. Applicable to various electronic conductive liquids
5. Not influenced by temperature, viscosity, pressure and density
6. Corrosion protection and self-diagnosis
7.Measure both to and reverse flow
8. Super large display, easy to operate
9. Long-term EEPROM, save data when power off
10. Support MODBUS/HART communication protocol
Installation Sketch
It should be installed at the lower part of the horizontal pipe and at the vertical upward position. Avoid installing at the highest point on the pipe and the vertical downward position
Install in the open discharge pipe, should beinstalled at the lower part of the pipe